Liberace

Y’all have heard about my obsession with Liberace. Not only could the man play the piano, he did it wearing rings the size of club sandwiches! Honestly, who doesn’t love a big fat cocktail ring? Especially when it was made by loving little hands.

Must give credit where credit is due: I learned about these rings at my BFF’s bridal shower, from Masha, who saw this clip on the Martha Stewart Show. Martha’s guest, The Pipe Cleaner Lady (that’s really her name!), breaks it down nicely. You can tell she has shown thousands of people how to do it. Be sure to check out her website for all kinds of cool ideas.

My fall themed variation is a little different. I found that twisting two pipe cleaners together made them thicker, stronger, and less likely to snag. Try it out and see for yourself!

Materials:

• 12 pipe cleaners, but I suggest you get more. Once you make one of these babies, you will want to make more in a hurry!

Instructions:
 1.    Twist two pipe cleaners together making one long strand. I chose warm colors similar in tone, but you have fun and pick for yourself!
2.    Repeat process four more times, resulting in 5 double strands of pipe cleaners.

3.    Take two green pipe cleaners and twist together 2” in the middle. This will leave four long ends.
4.    Bend the green pipe cleaners in half and insert the ring finger of your non-dominant hand, forming a loose “X”
5. Pinch and twist the green pipe cleaners around several times. The end result should be a ring around your finger with a helicopter propeller on top.
6. Use the green pipe cleaners to attach the five double stands you previously twisted. Note: TWIST HARD on this one. This particular twist is important and your final ring will go all loosey goosey if this juncture is not secure. Little hands may need help with this part.

7. Take the tip of a double strand and pinch it in toward the center.
8. Continue your pinch and roll up the double strand similar to a snail, winding as tight as you can.
9. Repeat on the other strands until your petals are done. Arrange as you see fit. I like the asymmetrical look, but some prefer to cup them toward the center, similar to a rose or a dahlia. Y’all have fun with that.

10. For stems, take the four green pipe cleaners and loop them back toward the center/under the petals. Twist to secure.
11. Pinch and twist the green loops together forming the stems.
12. And there you have it!  I dare you to make just one of these. Once you conquer the flower ring, move on and experiment…sparkle rings, bracelets, cat hats…the sky is the limit!

This is a super fun party project for kids and adults. It can be simplified or expanded in so many ways. I made these at an annual picnic with hundreds of kids of all ages, and everyone caught on pretty quick. I did a couple demonstrations and then the ripple effect took place….before you knew it the older kids started showing the younger ones and so on and so on. Don’t you love it when that happens?

 Side note: look, I am not advertising for anyone here, but I spent a good deal of time researching deals on pipe cleaners and this appears to be it. Of course, you can always buy cheaper at the craft store with a 40% off coupon (you know who I’m talking about!)…but if you are buying large quantities for a party, this online source has quality stuff at a decent price. Feel free to do your own research; I’m just trying to save some time.